🏍 MC Biker

You can buy the map on tebex.

Map protected via Asset Escrow.

Load map

For load map, just ensure hellsv2 on server.cfg and restart server.

Make sure you don't make a subfolder.

If you use winscp or filezilla please verify that the file.fxap is sent successfully.

If you had a problem with the mapping, maybe try uploading again, sometimes ftp can break files.

The map disappears ?

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating props

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating lights

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

You can't enter of mlo ?

If you can't enter the mlo or walk the entire melo, you have a collision conflict. (.ybn)

Floating lights

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

You can't enter of mlo ?

If you can't enter the mlo or walk the entire melo, you have a collision conflict. (.ybn)

Conflict

If you encounter conflicts with other mappings, check if you have this in other mappings with a simple search, and remove duplicates in other mappings, then check if you have a problem with the other mapping in question .

• hei_ch3_occl_01.ymap

• hei_dt1_occl_05.ymap

• hei_id2_21_strm_1.ymap

• hei_id2_occl_03.ymap

• hei_id2_rdb.ymap

• hei_id2_rdb_strm_2.ymap

• hi@id2_21_0.ybn

• id2_21_1.ybn

• ch3_occl_01.ymap

• dt1_occl_05.ymap

• id2_21_strm_1.ymap

• id2_occl_03.ymap

• id2_rdb.ymap

• id2_rdb_strm_2.ymap

Position

x= 1088.4020996094, y= -768.95092773438, z= 57.777893066406