Page cover

๐Ÿ‘– Binco

You can buy the map on tebex.

How to install the map ?

  • For load map, just ensure molo_binco on server.cfg and restart server.

  • Make sure you don't make a subfolder.

  • If you use winscp or filezilla please verify that the file.fxap is sent successfully.

  • If you had a problem with the mapping, maybe try uploading again, sometimes ftp can break files.

The map disappears ?

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating props

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating lights

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

You can't enter of mlo ?

If you can't enter the mlo or walk the entire melo, you have a collision conflict. (.ybn)

Conflict

  • If you encounter conflicts with other mappings, check if you have this in other mappings with a simple search, and remove duplicates in other mappings, then check if you have a problem with the other mapping in question .

  • hei_ch1_04b.ymap

  • hei_ch1_04b_interior_v_clotheslo_milo_.ymap

  • hei_cs1_03.ymap

  • hei_cs1_03_interior_v_clotheslo_milo_.ymap

  • hei_cs2_01.ymap

  • hei_cs2_01_interior_v_clotheslo_milo_.ymap

  • hei_dt1_15_interior_v_clotheslo_milo_.ymap

  • hei_vb_25.ymap

  • hei_vb_25_interior_v_clotheslo_milo_.ymap

  • lr_cs6_03.ymap

  • lr_cs6_03_interior_v_clotheslo_milo_.ymap

  • lr_sc1_11.ymap

  • lr_sc1_11_interior_v_clotheslo_milo_.ymap

  • ch1_04b.ymap

  • ch1_04b_interior_v_clotheslo_milo_.ymap

  • cs1_03.ymap

  • cs1_03_interior_v_clotheslo_milo_.ymap

  • cs2_01.ymap

  • cs2_01_interior_v_clotheslo_milo_.ymap

  • dt1_15_interior_v_clotheslo_milo_.ymap

  • vb_25.ymap

  • vb_25_interior_v_clotheslo_milo_.ymap

  • cs6_03.ymap

  • cs6_03_interior_v_clotheslo_milo_.ymap

  • sc1_11.ymap

  • sc1_11_interior_v_clotheslo_milo_.ymap

  • dt1_15_clotheslow_slod_children.ydd

  • v_9_li_tv_uv008.ydr

  • v_clotheslo.ybn

Compatibility

You use gabz maps ? This compatibility patch
  • After delete hei_dt1_22.ymap and lr_cs6_03.ymap in the gabz maps.

You use our binco and families ? This compatibility patch
  • Replace this in the molo_binco\stream\ymap.

  • After delete lr_sc1_11.ymap folder on molo_families\stream.

Position #1

x= 414.99404907227, y= -807.83734130859, z= 29.345012664795, h= 266.46041870117

Position #2

x= -817.10327148438, y= -1079.9989013672, z= 11.132525444031, h= 33.319438934326

Position #3

x= 84.528366088867, y= -1391.6337890625, z= 29.412755966187, h= 85.830696105957

Position #4

x= 1198.2261962891, y= 2700.6909179688, z= 38.155834197998, h= 5.2670340538025

Position #5

x= 1684.0803222656, y= 4820.01171875, z= 42.022411346436, h= 277.86083984375

Position #6

x= -2.4266946315765, y= 6518.2060546875, z= 31.477228164673, h= 234.6749420166

Position #7

x= -1094.3884277344, y= 2704.7856445312, z= 19.077732086182, h= 48.446472167969

Last updated