Page cover image

๐Ÿš“ Mission Row PD

You can buy the map on tebex.

How to install the map ?

For load map, just ensure molo_mrpdv2 on server.cfg and restart server.

Make sure you don't make a subfolder.

If you use winscp or filezilla please verify that the file.fxap is sent successfully.

If you had a problem with the mapping, maybe try uploading again, sometimes ftp can break files.

Exterior

If you should delete the exterior remplace the files "molo_mrpd_ext_ground_floor" molo_mrpd\stream\unlockmodels and the files molo_mrpd_milo_.ymap into molo_mrpd\stream\meta

Parking collision

If you have this, it's not really a problem, it's intentional, so people can't sneak into the police station via the bridge.

But you can remove it if you want, by deletingmolo_mrpd_props_colider.ydr

The map disappears ?

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating props

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating lights

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Change textures (logo, color etc)

If you want to change the textures of this mapping, you can look at its files.

molo_mrpd_props.ytd

molo_mrpd_interior_detail.ytd

molo_mrpd_interior.ytd

molo_mrpd_exterior.ytd

molo_mrpd_props_lightprojection.ytd

If you don't know how to change textures, please watch the tutorial here.

Change flags

If you want to change the flags, go to this page.

You can't enter of mlo ?

If you can't enter the mlo or walk the entire melo, you have a collision conflict. (.ybn)

Conflict

If you encounter conflicts with other mappings, check if you have this in other mappings with a simple search, and remove duplicates in other mappings, then check if you have a problem with the other mapping in question .

  • hei_dt1_19.ymap

  • hei_dt1_19_critical_0.ymap

  • hei_dt1_19_strm_0.ymap

  • hei_dt1_occl_05.ymap

  • hei_dt1_rd1.ymap

  • hei_dt1_rd1_critical_1.ymap

  • hei_dt1_rd1_strm_5.ymap

  • hei_dt1_rd1_strm_7.ymap

  • hei_id2_14_strm_0.ymap

  • dt1_19.ymap

  • dt1_19_critical_0.ymap

  • dt1_19_strm_0.ymap

  • dt1_occl_05.ymap

  • dt1_rd1.ymap

  • dt1_rd1_critical_1.ymap

  • dt1_rd1_strm_5.ymap

  • dt1_rd1_strm_7.ymap

  • id2_14_strm_0.ymap

  • vw_lodlights_medium019.ymap

Compatibility

You use Starlight Park V2 ? This compatibility patch
  • Delete the following folder molo_mrpdv2/stream/occlusions.

  • Delete the following folder molo_mrpdv2/stream/lodlight.

  • Replace this files in molo_mrpdv2/stream/meta.

  • Replace this files in lodstudios_starlight_parkv2\stream\lodlights.

Position

x= 416.5446472168, y= -980.74597167969, z= 29.431837081909

Last updated