🗺 Sewers

You can buy the map on tebex.

Map protected via Asset Escrow.

How to install the map ?

• For load map, just ensuremolo_sewer_open_version on server.cfg and restart server.

• Make sure you don't make a subfolder.

• If you use winscp or filezilla please verify that the file.fxap is sent successfully.

• If you had a problem with the mapping, maybe try uploading again, sometimes ftp can break files.

The map disappears ?

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

Floating props

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

Floating lights

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

Change textures (logo, color etc)

If you want to change the textures of this mapping, you can look at its files.

molo_sewer_interior.ytd

molo_sewer_decals.ytd

If you don't know how to change textures, please watch the tutorial here.

You can't enter of mlo ?

If you can't enter the mlo or walk the entire melo, you have a collision conflict. (.ybn)

You want delete script for your own ?

If you want to remove the elevator scripts to put your own, please delete clientfolder and config.lua.

Also change fxmanifest by this.

Conflict

If you encounter conflicts with other mappings, check if you have this in other mappings with a simple search, and remove duplicates in other mappings, then check if you have a problem with the other mapping in question .

Open Version :

• dt1_25_0.ybn

• dt1_25_build_ns.ydr

• dt1_rd1_2.ybn

• dt1_rd1_8.ybn

• dt1_rd1_r1_10.ydr

• dt1_rd1_r1_13.ydr

• dt1_rd1_r1_30.ydr

• hi@id2_00_1.ybn

• hi@id2_00_2.ybn

• id2_00_2.ybn

• id2_00_build02_b.ydr

• lr_sc1_11_0.ybn

• ma@dt1_rd1_0.ybn

• sc1_00g_0.ybn

• sc1_00g_detail.ydr

• sc1_00g_ground.ydr

• sc1_11_ground01.ydr

• dt1_rd1_strm_5.ymap

• hei_dt1_25_strm_0.ymap

• hei_dt1_rd1_strm_5.ymap

• sc1_00g_long_0.ymap

• dt1_25_strm_0.ymap

Teleport Version :

• hi@id2_00_1.ybn

• hi@id2_00_2.ybn

• id2_00_2.ybn

• id2_00_build02_b.ydr

Compatibility

Compatibility N Team Los Santos River

• Replace .ybn in the folder on molo_sewer_open_version\stream\models\exterior or molo_sewer_teleporter_version\stream\models\exterior

• After this, remove id2_00_2.ybn the N Team Los Santos River.

• id2_00_2.ybn

Compatibility Rudzik's Legion Square

• In molo_sewer_open_version/stream/models/exterior remplace this file molo_sewer_dt1_rd1_r1_10.ydr.

• After into the Rudzik's folder delete this file named : dt1_rd1_10.ydr.

You use our sewers and families ? This compatibility patch

• Replace this in the molo_families/stream.

• After delete lr_sc1_11_0.ybn folder on molo_sewer_open_version/stream/models/exterior.

Position #1

x= 540.88519287109, y= -1080.4597167969, z= 19.290853500366

Position #2

x= 405.67889404297, y= -1072.5362548828, z= 29.448360443115

Position #3

x= 341.27780151367, y= -1076.400390625, z= 29.53519821167

Position #4

x= 105.75242614746, y= -1410.7547607422, z= 29.274538040161

Position #5

x= 105.82353973389, y= -943.94927978516, z= 29.644611358643

Position #6

x= 13.234395027161, y= -948.15124511719, z= 29.357429504395

Position #7

x= 127.55344390869, y= -1253.1147460938, z= 29.516830444336