👮‍♂️LSPDHQ

You can buy the map on tebex.

Map protected via Asset Escrow.

How to install the map ?

• For load map, just ensure molo_lspdhq on server.cfg and restart server.

• Make sure you don't make a subfolder.

• If you use winscp or filezilla please verify that the file.fxap is sent successfully.

• If you had a problem with the mapping, maybe try uploading again, sometimes ftp can break files.

The map disappears ?

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating props

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Floating lights

If you have a problem like this, it is a conflict with a around map.

So it is not a problem with the map.

To fix this problem, you need to find which map is causing the problem.

Then, you are redirected to this tutorial.

If you don't know how to do it even with the tutorials, please use Vertex Hub Compatibility Tool.

Change textures (logo, color etc)

If you want to change the textures of this mapping, you can look at its files.

molo_lspdhq_props_lightprojection.ytd

molo_lspdhq_interior.ytd

molo_lspdhq_exterior.ytd

If you don't know how to change textures, please watch the tutorial here.

Change flags

If you want to change the flags, go to this page.

You can't enter of mlo ?

If you can't enter the mlo or walk the entire melo, you have a collision conflict. (.ybn)

Conflict

• If you encounter conflicts with other mappings, check if you have this in other mappings with a simple search, and remove duplicates in other mappings, then check if you have a problem with the other mapping in question .

• alta.ymt

• molo_lspd_manifest.ymf

• m23_2_prop_m32_poster_01a.ydr

• hei_hw1_occl_00.ymap

• hw1_occl_00.ymap

• hw1_lod_slod4_children.ydd

• hw1_rd_04_02.ydr

• molo_lspdhq_road.ydr

• ch1_07_water2.ydr

• dt1_05_fount_decal.ydr

• fwy_01_rd_01.ydr

• fwy_01_rd_01_r2b.ydr

• fwy_01_rd_09_ov.ydr

• hw1_27_ground.ydr

• hw1_27_ground_noshadow.ydr

• hw1_27_slod1_children.ydd

• hw1_lod_22_23_26_27_children.ydd

• hw1_lod_slod4.ydr

• hei_distlodlights_medium015.ymap

• hei_lodlights_medium015.ymap

• vw_distlodlights_medium015.ymap

• vw_lodlights_medium015.ymap

• hei_hw1_rd_strm_2.ymap

• hei_hw1_rd_long_0.ymap

• hei_hw1_rd_critical_0.ymap

• hei_hw1_rd.ymap

• hei_hw1_lod.ymap

• hei_hw1_27_strm_1.ymap

• hei_hw1_27_strm_0.ymap

• hei_hw1_27_long_0.ymap

• hei_hw1_27_critical_0.ymap

• hei_hw1_27.ymap

• hei_dt1_rd1_strm_2.ymap

• hw1_rd_strm_2.ymap

• hw1_rd_long_0.ymap

• hw1_rd_critical_0.ymap

• hw1_rd.ymap

• hw1_lod.ymap

• hw1_27_strm_1.ymap

• hw1_27_strm_0.ymap

• hw1_27_long_0.ymap

• hw1_27_critical_0.ymap

• hw1_27.ymap

• dt1_rd1_strm_2.ymap

• dt1_rd1_0.ybn

• fwy_01_3.ybn

• hei_hw1_rd_6.ybn

• hi@hei_hw1_27_0.ybn

• hi@hei_hw1_rd_6.ybn

• hi@hw1_27_0.ybn

• hw1_27_0.ybn

• ma@hw1_27_0.ybn

Compatibility

You use rudzik legion ? This compatibility patch

• Replace this folder in therdzk_c_square\stream\Main Content [STATIC PART]\ymap.

• After delete "lodlight" folder on molo_lspdhq\stream.

Compatibility our lspdhq and pillbox

• Delete dt1_rd1_0.ybn on molo_pillbox\stream\collision.

• After download dt1_rd1_0.ybn, and replace in the folder molo_lspdhq\stream\bound.

Position

x= 126.48506164551, y= -330.69586181641, z= 45.144237518311